An independent guide to Excel wheelchairs Models · Specifications · Practical advice
Wheelchair knowledge · Practical guidance

Wheelchair brakes: parking locks and attendant controls explained

Identify the different controls on your chair and prepare for a correct demonstration and maintenance check.

Two controls called “brakes” can do different jobs. A lever beside the rear wheel may be a parking lock, while a handle-mounted control may allow an attendant to slow the chair. The arrangement varies. Identify each control using the correct manual before assuming how it should be used.

Start with the exact equipment

Record the model, wheel configuration and any changes made since purchase. Look for the manufacturer’s description of each control and its intended purpose. Do not assume that a small lever or a bicycle-style handle works like equipment you have used before. Some attendant controls also have a parking function, but this must be confirmed for the chair.

The G-Logic manual provides model-specific brake information. Use the matching instructions and request a demonstration from the supplier. A photograph of a similar chair cannot confirm the internal mechanism or the fitted option.

Learn which control does what

Ask the demonstrator to name each control, show its normal operating range and explain how to recognise that it is engaged or released. If there is a locking button, ask how it is released without unexpectedly moving the chair. The wheelchair user and regular attendant should both understand the arrangement.

Do not try to slow a moving chair with a parking lock unless the manufacturer specifically instructs that use. Similarly, do not assume squeezing an attendant lever leaves the chair secured after the lever is released. These questions are easier to settle during a supervised demonstration than at a sloping entrance.

Build checks into the normal routine

Follow the pre-use and servicing checks in the manual. Notice if a lever feels different, one side engages earlier, a cable looks damaged or the chair moves when it should be held. Stop using a chair with uncertain braking and contact the repair provider. Describe the symptom rather than repeatedly tightening an adjustment until it seems to work.

Tyre condition and an altered wheel setup may be relevant to a brake problem, so tell the technician about recent changes. Do not compensate for a recurring issue by pushing harder on the lever. A successful test once does not explain why the problem occurred.

Separate equipment checks from transfer advice

The Frimley Health safety information includes applying brakes and clearing footrests when getting in or out of a standard chair. The complete transfer method still needs to suit the person. If you need assistance, obtain a demonstrated plan rather than assembling techniques from several online articles.

Ask where the chair should be positioned, who operates each control and what happens if the surface is unsuitable. An attendant should know when the user is ready before beginning an agreed manoeuvre. Communication and appropriate training are part of using the equipment confidently.

Questions for a service appointment

  • Are these parking locks, slowing controls or both?
  • Which checks can the user perform?
  • Which adjustments require a technician?
  • Has a tyre or wheel change affected the setup?
  • What should happen if a brake fails away from home?

Keep any service instructions with the wheelchair record. If several people assist, arrange consistent training instead of relying on whoever last used the chair. A simple labelled photograph may help identify the controls, provided it accompanies the correct instructions rather than replacing them.

Describe faults clearly

A useful report might say, “the right parking lever now reaches its end position without holding the wheel on our usual level floor; the tyre was replaced last week”. That gives the service provider more to work with than “the brakes are bad”. Include when the fault began and whether the chair is currently safe to move unoccupied.

Never create a demonstration of a fault on a slope or with someone exposed to a fall. The aim is to give a technician enough information to inspect the chair, not to prove the failure yourself. Reliable controls begin with correct identification, an appropriate demonstration and prompt attention to changes.